Have a question about our timber products, or want to know more about our processes?
Use the form below to submit your question. It will be promptly reviewed and answered by our technical team.
When our customer needed to demolish a large dock they needed to come up with a solution for dropping concrete waste onto a floating platform. Floating swamp mats was a quick and efficient answer. They float and they can take a lot of abuse....
Our customer used our Access Mats to bring in a thousand loads of structural fill to a site in Tsawwassen, BC. All the dump trucks ( transfer trucks) used this temporary roadway to avoid any damage to surrounding lands. Access Mats are 8' wide...
Sometimes you need a place to dock the work boat! We supplied 4' wide x 30' long x 12" thick Crane Mats for both a ramp and the floating dock. Quick job!
We supplied these Trestle Mats to create a temporary bridge beside the actual bridge under construction. The temporary bridge provided a safe driving surface for the crawler cranes, redi-mix trucks, and all ancillary vehicles. Once the construction was completed, the temporary bridge was dismantled...
These hand placed small Timber Stop Logs are being used in Ontario in a difficult to reach location through a manhole. They are light enough to manhandle into position without the use of a crane. The neoprene seal in the bottom of each stop...
These blocks are simple 6" x 6" x 24" full sawn Hemlock blocks. They will be used to block under heavy cement pre-stressed modules in preparation for installation at the Vancouver Airport.
These Timber Stop Logs are made from Douglas Fir Select Structural and come complete with neoprene seals and galvanized lifting ears. Each piece is 6" x 6" - 10' long. These seals are designed to reduce any leakage since these Stop Logs will be...
Our customer is rehabilitating a river drainage in North Vancouver. They have to walk a machine carefully up the middle of the river, staying off the bottom away from the sand and gravel. They achieved this by laying down Swamp Mats and carefully working...
Transition Mats - these are being used by a customer to "flatten" a landing zone for a Genie lift. The site is on a steep hill and this was the best value solution to keep the machine flat through many moves. We make interesting...
These Mini-Access Mats are used where a smaller footprint is required. These are 6' wide x 8' long x 3-1/2" thick. 99 bolts. They are 2 ply and are useful for smaller machinery like mini-excavators and bobcats. Better than laying plywood out and discarding...
These transition mats will be used to "flatten" a crane site on a steep hill in the urban jungle. Sometimes our customers can not find a flat place to park a crane for a lift, these wedges will allow a lift on a steep...
Our mats are designed to provide a safe and stable base for heavy-duty cranes. In this photo, the mats are positioned to create a platform for the crane to operate on, this helps protect the concrete under the crane from buckling or sinking under...
We love specialty projects! We supplied this suspension bridge with all new 4"x6" Yellow Cedar decking. With the natural strength and durability of Yellow Cedar, this bridge should last many years even with regular use.
This project was completed by Axis Mountain Technical.
These contoured pipe saddles are designed to safely hold two 48" pipes for transportation on a truck-bed. The actual dimensions of this dunnage is 4" x 6" x 102", each scoop is cut to perfectly fit the curve of each pipe.
Industrial Timber Products can now be found on LinkedIn and we want to connect with you! Follow along as we share some industry news and stories from the different projects that we are working on.
Click here to connect with us!
These are treated sill plates 12" x 24" x 20' to support a variety of timber structures for a local Forestry company. Timber Toby is inspecting the quality of the product before shipment.
These wedges are 7" one side, 5" on the opposite side and 36" long. They are rail blocking ties under a small rail line in a large tunnel. The wedge conforms to the shape of the wedge and holds the rails horizontal. This is...
Customer bought this property for subdivision potential. The old bridge in place was condemned and would not support service vehicles or cement trucks. We supplied a BCFS L100 (90,000 kg rated) Timber Bridge in 3 parts for installation. Old bridge was removed, old abutments...
This Junttan PMX 22 pile driving rig is sitting on 4' x 20' Crane Mats from Industrial Timber Products. The unit weighs 65,000 kgs and is driving 20m long piles. Ground stability is an important aspect to this job.
We supplied this bridge to a local contractor who needs to access the back end of a Golf Course in Surrey. The golf course is doing a housing development. All vehicles, from cement trucks to excavators to plumbers and electricians will access the site...
These are Yellow Cedar Rail Crossing Posts, you have probably seen them with the crossed white signs with black writing. We still have lots of work to do to them, we pre-drill them, we tee-pee the tops so the water runs off and we...
These jack blocks are used between steel jacks and the steel car bodies and axles, to stop steel on steel contact. They get heavy use. The black handles have chain inside them. The end handles on the 6" x 8" Maple Blocks are so...
Check out this nice contoured dunnage, 36" diameter pipe saddles, 3 across on single sided dunnage (for the bottom of the truck deck) and for between the layers of pipe (double sided). This will ensure nothing rolls around on the freeway!
As this picture indicates the Rail Crossing Panels are underneath the train cars in this train yard. Machinery is already crossing the panels as they access the roadway and move machinery across the rail tracks. Nice graffiti on this rail car! Colourful at least!
You have no products in your quote list or cart.
