Main content
Product Blog
Gas Line Air Bridge (Temporary Equipment Crossing)
This is an "Air Bridge" which is kind of a funny name, but it is used for heavy machinery to cross over an industrial gas line (or any buried utility) and provides an air gap between the pipe line and the equipment. Basically it...
Heavy Saddle Blocks for 14′ diameter pipe!
These Large Pipe Saddles are 16" high x 8" wide x 40" long. They are custom sized to fit a 160" diameter pipe (80" radius). The timber blocks will be bolted to steel plates which will sit on the truck. These pipes will be...
Contoured Dunnage AKA Pipe Saddles
There is a lot of steel pipe moving around Western Canada these days. To carry it safely on a truck or a rail car we make pipe saddles, or pipe dunnage or contoured dunnage. We can supply 24"-72" diameter, and in special cases even...
Timber Wedge – Crane Moves on mountain slope
Look at these giant wedges, customer needs to operate a giant Crawler Crane on a 8% slope. We built 2 wedges 3" at the toe, 39" at the heel, 60" wide and 40' long. Featuring engineered lifting hooks, steel toe plate and 1-1/4" rods...
Flat Deck Truck Decking
We often supply Douglas Fir timbers for truck decking. Often we don't get to see how the installation went. In this case the Customer stopped by to show us how it worked out. You can't see it to well, but under the anti-slip metal...
Yellow Cedar Timber Playground
This currently muddy mess is a new playground being built with specialty Yellow Cedar timbers that we supplied. It will be the latest and greatest playground with natural materials, no pressure treated timber. It will include ramps and climbing walls and other structures for...
Pedestrian – ATV – Horse – Golf Cart Bridge
This bridge spans 26' across a large ditch, it is built narrow (in width) to prevent road vehicles from traveling on it, but it is wide enough for any Golf Cart, ATV or lawnmower tractor to cross. Rated at 5000 kg you could fit...
Helicopter Mats
These mats are going to Northern BC where they are being flown in to a remote job site. The mats are 6" thick x 96" wide x 12' long and weigh approximately 1900 lbs each. A drill will be flown in to sit on...
BIG DIGGER MATS!
These extra Heavy Duty Digger Mats are 16" thick x 48" wide x 20' long and have 2 drag cables and 5 rods 1-1/4" diameter. . Typically for large 400 Excavators where you have heavy machinery working. Call us for a quotation.
Digger Mats for Vancouver Project
These are the standard!
12" x 48" x 20' Digger Mats have 4 rods 1-1/4" diameter and 2 cables 3/4" diameter. The thimbles on the cables surround the rod. The cables are used to drag the mats into position. Protect your ground, don't get your...
Timber Outrigger Pads – Heavy Duty with deflection plates
These Timber Outrigger Pads feature 1/4" steel plates between the 8" x 8" Douglas Fir #1 and btr structural timbers. No deflection when these are set up on a heavy point load. These will last for 10 years through daily use. 8" x 48"...