Have a question about our timber products, or want to know more about our processes?
Use the form below to submit your question. It will be promptly reviewed and answered by our technical team.
"*" indicates required fields
These mats are going to a customer in Washington for use on a Wind Farm project. These are fine looking mats, straight, square, flat topped, no wane and are built with 6 rods 1-1/4" diameter. They have notches or daps in the end for...
These helicopter hooks can be installed in the corner of Access Mats so they can be bridled and flown into a remote site by a helicopter. Sometimes the access mat actually acts as the landing pad for the helicopter on a remote site.
Digger mats feature a cable from the top of the mat for dragging the mats into position, typically with an excavator. Sometimes if the mats are used as just support mats (like a Crane Mats) the mats can be flipped over and the cables...
these are 12" x 48" x 30' long Heavy Duty Crane Mats. Important points are flat top construction so that a Large Crawler Crane is not having to cross any "steps" in the mats. When the boom is up on some of these huge...
These 2 BIG Wedges are 36" tall x 36" wide and 120" long with a 2" toe and 36" high at the heel. Used for leveling up a mobile Crane Truck on a severe slope. This slope is about 30%. Notice the yellow Certified...
Here is a project that is using all forms of standard matting, we have Crane Mats on the base (over the geotextile fabric) and then steel Rig Mats lying crosswise on top of the Crane Mats, followed finally by Access Mats on top to...
These Crane Mats are specially made for a customer who does reclamation work on tidal areas. Sometimes the machinery is working right in the water. The cables are designed to always "stick up" so that the machine operator can "find" the mats in deeper...
These Access Mats that we supplied are being laid down in a rural area (farmland) where a pipeline is being installed. The Access Mats will protect the farmland from degradation and will be removed after completion of the job. The grass planted on this...
If there is any question what Crane Mats are for this picture should answer the question. A wide stable base makes it "stable" for a Pile Driver to set up and get consistent results. Piles have to be consistently placed in the correct location....
These 12" x 48" x 20' off-set Crane Mats are being delivered to a windfarm site in eastern Alberta today. Weather is cold and crisp, no snow yet! Notice the larger "dap" in these mats, these are built using 2 shorter timbers in the...
These mats are being delivered to a wind farm that is being built east of Calgary in Alberta. The mats will we laid out in pads and a large heavy lift Crawler Crane will be erecting the poles and nacelle and blades of the...
These large Crane Mats are for a special job in Alberta where 72" wide mats was required by the engineer. We produced 5' and 10' and 20' mats so that everything fit into a grid.
You have no products in your quote list or cart.
