Contoured Pipe Saddle Dunnage with protection carpet
This is 6" x 8" x 8' contoured dunnage designed for 4 pieces wide of 24" OD coated pipe. The carpet protects the coating. We never put nails in the "moon" shape area.
Main content
Product Blog
Select Category:
Tunnel Pipe Support Blocks
These inside and outside curve (different diameters) are timber support brackets to "suspend" a steel water pipe inside a cement large diameter tunnel. After everything is "hung" in the tunnel the cavity outside the steel pipe is filled with special grout. The support blocks...
Oversize Contoured Dunnage for Pipe and Pile Casings
These are Pipe Saddles for large casings (pipes/piles) that are travelling on a barge. There is a potential for rough weather and the casings can not roll around. This design is for 60" OD piles. The timbers are 12" x 12" x 120" long....
Contoured Dunnage AKA Pipe Saddles
This is 16" OD Pipe Saddles made from 6" x 6" x 8' timber with "single side" and 6" x 8" x 8' with "double side". Our customer is a production welding company building transmission towers. They are storing the 16" pipe in preparation...
Giant Pipe Saddles
These Pipe Saddles will support an intricate Pipe and Valve assembly in storage while maintenance work is taking place. The OD diameter of the pipe is 88-3/8". We made a few of these for our customer. The notches are only to be used for...
Pipe Saddles – Contoured Dunnage
This customer is a transport company moving 24" OD long length steel pipe. "Single-sided" dunnage goes on the bottom and "double-sided" goes on the upper layer. This keeps the pipes in alignment and "cradled" for safe transport.
Contoured Dunnage – large pipes going every which way but loose
Here is an order of Contoured Dunnage, AKA Pipe Saddles. All dunnage in this case is 102" long to fit a flat deck truck. This dunnage is for pipe that is 30", 36" and 42" outside diameter. They will load the bottom layer using...
Timber Wedges
These timber wedges are being used by a logistics company to secure large pipe from rolling. They are 6" tall and 12" on base, 45 degree cut, making the angle about 8" long. A squirt of polyurethane and a couple of nails will hold...
Contoured Dunnage for Dock Terminal
These contoured pipe skids were sent to a West Coast port to support some expensive coated 24" diameter pipe. Ropes around the special coated pipe keeps pipes separated when being transported.Â
Pipe and Pile Dunnage – Contoured Dunnage
This is Hemlock Pipe and Pile dunnage, some of this is for 24" diameter pipe and some for 42" diameter Pipe. We can do most industrial sizes from 24" up to 120" diameter!Â
More Contoured Dunnage 8″ x 8″ x 30″ pipe
This contoured dunnage is for large pipe for truck shipment. The safest way to transport Piles and Pipes. Note the 4 pipe saddles on the bottom skids and then on the other side it is 3 pipe saddles. This way the truck carries 7...
Contoured Dunnage AKA Pipe Saddles
this is big 30" coated pipe, being layed down in a yard close to a pipeline replacement job. This is the safest way, best practice, to inventory stacks of piles or pipes in a storage yard. Please take a moment to gaze upon the...