Have a question about our timber products, or want to know more about our processes?
Use the form below to submit your question. It will be promptly reviewed and answered by our technical team.
"*" indicates required fields
These specialty Rail Wheel Chocks are designed to hold a set of Rail Car Bogies. Each flanged wheel sits in a chock. Generally speaking these are used when the bogies are being repaired (Rail Car Shop) or when being stored for deployment.
Often supplied as 8" thick or 7" thick or 6" thick x 50" wide with accompanying side panels, these are fast deploy Rail Crossing Kits. Ready to drop in to place and lag down to the ties. The undercut is to clear the rail...
These are an environmentally sensible alternative to traditional creosote Rail Ties. Yellow Cedar Rail Ties will "wear out" before they rot out, and these products hold the gauge very well (gauge is the ability to hold the rail spikes in position so the track...
These are pre-drilled and shaped timbers ready for incising and treating and eventual painting to be used as Rail Crossing Posts. The holes are drilled to accept the Cross Buck
These are 6" x 10" Hem/Fir #2 and btr timbers which are being used by a Rail Service Company to install Crossings. The wedge shape is installed downward, with the 10" face upwards. The wedge shape rests against a heavy rubber extrusion which is...
These Rail Crossing Panels are going to a private Grain rail distribution point, where rail cars are shunted on rail sidings to fill and organize. The crossings will be placed so construction equipment can access a new build facility. These Crossings can be quickly...
These nice looking briefcase Jack Blocks are designed to fit on top of a jack, stuck between metal and metal, to lift Rail Cars for repairs and maintenance. They look nice enough to be coffee tables! Kiln Dried Maple is hard, laminated and bolted...
These rail crossing timbers are 7" thickness x 10" wide x 20' long. You can see we custom saw the bottom triangle out of the pieces that are closest to the rail, so that they lay flat. Inside the "missing triangle" are the rail...
Check out these 4" x 16" x 32" Pacific Coast Maple Hardwood Jack Blocks. Complete with suitcase handles (but stronger). These will be used in a Rail Car shop where they do repair work. The Jack Blocks go between the steel jacks and the...
Timbers for Rail Crossings are needed in a hurry, sometimes to access across tracks for emergency repairs. We make several sizes depending on rail height (6" x 10", 7" x 10" and 8" x 10"). We undercut the bottom corners on 4 pieces to...
These Pacific Coast Maple Jack Blocks are being used by the BC Transit Skytrain repair yard. Maple makes a good jacking block by keeping a steel on steel contact apart. Steel on the Jack Block won't slip or skid.
We are building these Rail Crossing Kits for a customer, each "kit" comes with 5 middle pieces (between the rails) and 2 outside pieces (outside the rails). The pieces closest to the rails are bevelled to allow for the rail plates/nails to clear. This...
You have no products in your quote list or cart.
